Termination w.r.t. Q proof of TRS/Cimeternary.trs

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.

↳ QTRS

  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

+¹(j(x), j(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(y, z)
OPP(j(x)) → OPP(x)
+¹(1(x), j(y)) → +¹(x, y)
+¹(j(x), 1(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(x, *(y, z))
-¹(x, y) → +¹(x, opp(y))
+¹(j(x), 1(y)) → 0¹(+(x, y))
+¹(1(x), j(y)) → 0¹(+(x, y))
+¹(0(x), 0(y)) → +¹(x, y)
-¹(x, y) → OPP(y)
*¹(j(x), y) → *¹(x, y)
OPP(0(x)) → OPP(x)
+¹(+(x, y), z) → +¹(y, z)
*¹(1(x), y) → 0¹(*(x, y))
*¹(1(x), y) → *¹(x, y)
+¹(j(x), j(y)) → +¹(+(x, y), j(#))
+¹(0(x), 0(y)) → 0¹(+(x, y))
*¹(j(x), y) → 0¹(*(x, y))
*¹(1(x), y) → +¹(0(*(x, y)), y)
*¹(j(x), y) → -¹(0(*(x, y)), y)
+¹(1(x), 1(y)) → +¹(x, y)
OPP(0(x)) → 0¹(opp(x))
+¹(j(x), 0(y)) → +¹(x, y)
+¹(0(x), j(y)) → +¹(x, y)
+¹(+(x, y), z) → +¹(x, +(y, z))
OPP(1(x)) → OPP(x)
*¹(0(x), y) → 0¹(*(x, y))
*¹(0(x), y) → *¹(x, y)
+¹(1(x), 0(y)) → +¹(x, y)
+¹(0(x), 1(y)) → +¹(x, y)
+¹(1(x), 1(y)) → +¹(+(x, y), 1(#))

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

Q DP problem:
The TRS P consists of the following rules:

+¹(j(x), j(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(y, z)
OPP(j(x)) → OPP(x)
+¹(1(x), j(y)) → +¹(x, y)
+¹(j(x), 1(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(x, *(y, z))
-¹(x, y) → +¹(x, opp(y))
+¹(j(x), 1(y)) → 0¹(+(x, y))
+¹(1(x), j(y)) → 0¹(+(x, y))
+¹(0(x), 0(y)) → +¹(x, y)
-¹(x, y) → OPP(y)
*¹(j(x), y) → *¹(x, y)
OPP(0(x)) → OPP(x)
+¹(+(x, y), z) → +¹(y, z)
*¹(1(x), y) → 0¹(*(x, y))
*¹(1(x), y) → *¹(x, y)
+¹(j(x), j(y)) → +¹(+(x, y), j(#))
+¹(0(x), 0(y)) → 0¹(+(x, y))
*¹(j(x), y) → 0¹(*(x, y))
*¹(1(x), y) → +¹(0(*(x, y)), y)
*¹(j(x), y) → -¹(0(*(x, y)), y)
+¹(1(x), 1(y)) → +¹(x, y)
OPP(0(x)) → 0¹(opp(x))
+¹(j(x), 0(y)) → +¹(x, y)
+¹(0(x), j(y)) → +¹(x, y)
+¹(+(x, y), z) → +¹(x, +(y, z))
OPP(1(x)) → OPP(x)
*¹(0(x), y) → 0¹(*(x, y))
*¹(0(x), y) → *¹(x, y)
+¹(1(x), 0(y)) → +¹(x, y)
+¹(0(x), 1(y)) → +¹(x, y)
+¹(1(x), 1(y)) → +¹(+(x, y), 1(#))

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We deleted some edges using various graph approximations

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

+¹(j(x), j(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(y, z)
OPP(j(x)) → OPP(x)
+¹(j(x), 1(y)) → +¹(x, y)
+¹(1(x), j(y)) → +¹(x, y)
*¹(*(x, y), z) → *¹(x, *(y, z))
-¹(x, y) → +¹(x, opp(y))
+¹(0(x), 0(y)) → +¹(x, y)
+¹(1(x), j(y)) → 0¹(+(x, y))
+¹(j(x), 1(y)) → 0¹(+(x, y))
-¹(x, y) → OPP(y)
*¹(j(x), y) → *¹(x, y)
OPP(0(x)) → OPP(x)
+¹(+(x, y), z) → +¹(y, z)
*¹(1(x), y) → 0¹(*(x, y))
*¹(1(x), y) → *¹(x, y)
+¹(j(x), j(y)) → +¹(+(x, y), j(#))
+¹(0(x), 0(y)) → 0¹(+(x, y))
*¹(1(x), y) → +¹(0(*(x, y)), y)
*¹(j(x), y) → 0¹(*(x, y))
+¹(1(x), 1(y)) → +¹(x, y)
*¹(j(x), y) → -¹(0(*(x, y)), y)
OPP(0(x)) → 0¹(opp(x))
+¹(+(x, y), z) → +¹(x, +(y, z))
+¹(0(x), j(y)) → +¹(x, y)
+¹(j(x), 0(y)) → +¹(x, y)
OPP(1(x)) → OPP(x)
*¹(0(x), y) → 0¹(*(x, y))
*¹(0(x), y) → *¹(x, y)
+¹(0(x), 1(y)) → +¹(x, y)
+¹(1(x), 0(y)) → +¹(x, y)
+¹(1(x), 1(y)) → +¹(+(x, y), 1(#))

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 3 SCCs with 11 less nodes.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

OPP(0(x)) → OPP(x)
OPP(1(x)) → OPP(x)
OPP(j(x)) → OPP(x)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

OPP(j(x)) → OPP(x)

The remaining pairs can at least be oriented weakly.

OPP(0(x)) → OPP(x)
OPP(1(x)) → OPP(x)

Used ordering: Combined order from the following AFS and order.
OPP(x1) = x1
0(x1) = x1
1(x1) = x1
j(x1) = j(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

OPP(1(x)) → OPP(x)
OPP(0(x)) → OPP(x)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

OPP(0(x)) → OPP(x)

The remaining pairs can at least be oriented weakly.

OPP(1(x)) → OPP(x)

Used ordering: Combined order from the following AFS and order.
OPP(x1) = x1
1(x1) = x1
0(x1) = 0(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

OPP(1(x)) → OPP(x)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

OPP(1(x)) → OPP(x)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
OPP(x1) = x1
1(x1) = 1(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

+¹(j(x), j(y)) → +¹(x, y)
+¹(1(x), 1(y)) → +¹(x, y)
+¹(1(x), j(y)) → +¹(x, y)
+¹(j(x), 1(y)) → +¹(x, y)
+¹(0(x), j(y)) → +¹(x, y)
+¹(j(x), 0(y)) → +¹(x, y)
+¹(+(x, y), z) → +¹(x, +(y, z))
+¹(0(x), 0(y)) → +¹(x, y)
+¹(+(x, y), z) → +¹(y, z)
+¹(j(x), j(y)) → +¹(+(x, y), j(#))
+¹(0(x), 1(y)) → +¹(x, y)
+¹(1(x), 0(y)) → +¹(x, y)
+¹(1(x), 1(y)) → +¹(+(x, y), 1(#))

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

*¹(*(x, y), z) → *¹(y, z)
*¹(j(x), y) → *¹(x, y)
*¹(1(x), y) → *¹(x, y)
*¹(0(x), y) → *¹(x, y)
*¹(*(x, y), z) → *¹(x, *(y, z))

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

*¹(*(x, y), z) → *¹(y, z)
*¹(*(x, y), z) → *¹(x, *(y, z))

The remaining pairs can at least be oriented weakly.

*¹(j(x), y) → *¹(x, y)
*¹(1(x), y) → *¹(x, y)
*¹(0(x), y) → *¹(x, y)

Used ordering: Combined order from the following AFS and order.
*¹(x1, x2) = x1
*(x1, x2) = *(x1, x2)
j(x1) = x1
1(x1) = x1
0(x1) = x1

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

*¹(j(x), y) → *¹(x, y)
*¹(1(x), y) → *¹(x, y)
*¹(0(x), y) → *¹(x, y)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

*¹(0(x), y) → *¹(x, y)

The remaining pairs can at least be oriented weakly.

*¹(j(x), y) → *¹(x, y)
*¹(1(x), y) → *¹(x, y)

Used ordering: Combined order from the following AFS and order.
*¹(x1, x2) = x1
j(x1) = x1
1(x1) = x1
0(x1) = 0(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

*¹(j(x), y) → *¹(x, y)
*¹(1(x), y) → *¹(x, y)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

*¹(1(x), y) → *¹(x, y)

The remaining pairs can at least be oriented weakly.

*¹(j(x), y) → *¹(x, y)

Used ordering: Combined order from the following AFS and order.
*¹(x1, x2) = x1
j(x1) = x1
1(x1) = 1(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

*¹(j(x), y) → *¹(x, y)

The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

*¹(j(x), y) → *¹(x, y)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
*¹(x1, x2) = x1
j(x1) = j(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ PisEmptyProof

Q DP problem:
P is empty.
The TRS R consists of the following rules:

0(#) → #
+(#, x) → x
+(x, #) → x
+(0(x), 0(y)) → 0(+(x, y))
+(0(x), 1(y)) → 1(+(x, y))
+(1(x), 0(y)) → 1(+(x, y))
+(0(x), j(y)) → j(+(x, y))
+(j(x), 0(y)) → j(+(x, y))
+(1(x), 1(y)) → j(+(+(x, y), 1(#)))
+(j(x), j(y)) → 1(+(+(x, y), j(#)))
+(1(x), j(y)) → 0(+(x, y))
+(j(x), 1(y)) → 0(+(x, y))
+(+(x, y), z) → +(x, +(y, z))
opp(#) → #
opp(0(x)) → 0(opp(x))
opp(1(x)) → j(opp(x))
opp(j(x)) → 1(opp(x))
-(x, y) → +(x, opp(y))
*(#, x) → #
*(0(x), y) → 0(*(x, y))
*(1(x), y) → +(0(*(x, y)), y)
*(j(x), y) → -(0(*(x, y)), y)
*(*(x, y), z) → *(x, *(y, z))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.